..

..

..

..

..

The Hardened Steel Bevel Gear A 16T is designed for optimum rigidity, stability and durability on the Blade 180 CFX helicopter. The new upgrade product is CNC machined from Hardened Steel material, for maximum rigidity and durability. It is used to mount in the frame and the tail gear case and directly replaced the stock plastic torque tube gea..

The Hardened Steel Bevel Gear A/B are designed for optimum rigidity, stability and durability on the Blade 180 CFX helicopter. The new upgrade product are CNC machined from Hardened Steel material, for maximum rigidity and durability. More than that, with the exceptional support of the thick Aluminum Spacer which is mounted in the frame, it wil..

The Hardened Steel Bevel Gear B 16T is designed for optimum rigidity, stability and durability on the Blade 180 CFX helicopter. The new upgrade product is CNC machined from Hardened Steel material, for maximum rigidity and durability. More than that, with the exceptional support of the thick Aluminum Spacer which is mounted in the frame, it wil..

   ..

    Includes 2 x Hardened Steel Inner Shaft      Material Hardened Steel   ..

The Hardened Steel Pinion Gear E 21T with Shaft is optimized for rigidity and durability of the Blade 180 CFX helicopter. It is compatible and directly replaced the stock plastic gear and stainless steel shaft. The new upgrade product will be optimal if used with the Hardened Steel Bevel Gear A 16T (Product Code: MH-18FX008A) and  the Hard..

The Hardware set is a replacement hardware for MH-MSR002S CNC Aluminum Upgrade combo.   Includes 2 x Pan Head M1x4mm 5 x Pan Head M1.2x4mm 4 x Pan Head M1.2x3mm 3 x Pan Head M1.2x5mm ..

  Includes: 2 x M1.2x4mm Countersink Self Tapping Screw 19 x M1x2mm Phillips Head Screw 17 x M1x3mm Self Tapping Screw 1 x M1.2x3mm Countersink Head Screw 5 x M1.2x3mm Phillips Head Screw 7 x M1x3mm Phillips Head Screw 5 x M1.2x4mm Phillips Head Screw 1 x M1.4x3mm Phillips Head Screw 1 x M1.2x5mm Phillip..

The Hardware set for Microheli Frame 130 X Upgrades is very strong & light.  This design keeps the Microheli Frame 130 X very close to the Motor, to maintain stock flying characteristics.  With a good quality Hardware set, it will give you the confidence needed for worry free flying. Each Hardware will be self tightening while the..

The Hardware set for Microheli 180 CFX Upgrades is very strong & light. This set keeps the Microheli 180 CFX Upgrades very close to Motor, to maintain stock flying characteristics. With the good quality Hardware set, it will give you the confidence needed for worry free flying. Each Hardware will be self tightening while the Motor is powere..

The Hardware set for Microheli Frame 200 QX Upgrades is very strong & light. This design keeps the Microheli Frame 200 QX very close to the Motor, to maintain stock flying characteristics.  With a good quality Hardware set, it will give you the confidence needed for worry free flying. Each Hardware will be self tightening while the Mot..

The Hardware set for Microheli Frame 2SRX Upgrades is very strong and light. This design keeps the Microheli Frame 2SRX very close to the Motor, to maintain stock flying characteristics. With a good quality Hardware set, it will give you the confidence needed for worry free flying. Each Hardware will be self tightening while the Motor is powere..

The Hardware set for Microheli Frame 350 QX Upgrades is very strong & light.  This design keeps the Microheli Frame 350 QX very close to the Motor, to maintain stock flying characteristics.  With a good quality Hardware set, it will give you the confidence needed for worry free flying. Each Hardware will be self tightening while t..

The Hardware set is very strong and light. This design keeps the MCPXBL frames very close to the motor to maintain stock flying characteristics. Replacing the stock Hardware set with a good quality aftermarket Hardware set will give you the confidence needed for worry free flying. Each Hardware will be self tightening while the motor is po..

The Hardware set for Microheli Frame mCP X/S Upgrades is very strong and light. This design keeps the Microheli Frame mCP X/S very close to the Motor, to maintain stock flying characteristics. With a good quality Hardware set, it will give you the confidence needed for worry free flying. Each Hardware will be self tightening while the Motor is ..

The Hardware set for Microheli Frame Nano CP X Upgrades is very strong & light.  This design keeps the Microheli Frame Nano CP X very close to the Motor, to maintain stock flying characteristics.  With a good quality Hardware set, it will give you the confidence needed for worry free flying. Each Hardware will be self tightening w..

..

..

    Includes 1 x Hex Screw Driver 1.5mm   *Note: Color of the handle can vary from batch to batch  ..

      Includes 1 x Hex Screw Driver 2.0mm   *Note: Color of the handle can vary from batch to batch  ..

..

..

..

..

..

..

..

..

..

..

..

..

Dimension: 190mm x 400mm, 7.5" x 15.75" Plain Weave Carbon Fiber Thickness Tolerance is 0.5mm +/- 15% Finish: Gloss/Gloss Weight: 52.1g  ..

Dimension: 190mm x 400mm, 7.5" x 15.75" Plain Weave Carbon Fiber Thickness Tolerance is 0.6mm +/- 15% Finish: Gloss/Gloss Weight: 73.1g  ..

Dimension: 190mm x 400mm, 7.5" x 15.75" Plain Weave Carbon Fiber Thickness Tolerance is 0.8mm +/- 15% Finish: Gloss/Gloss Weight: 100g  ..

Dimension: 190mm x 400mm, 7.5" x 15.75" Plain Weave Carbon Fiber Thickness Tolerance is 1.0mm +/- 15% Finish: Gloss/Gloss Weight: 120.8g  ..

Dimension: 190mm x 400mm, 7.5" x 15.75" Plain Weave Carbon Fiber Thickness Tolerance is 1.2mm +/- 15% Finish: Gloss/Gloss Weight: 148.9g  ..

Dimension: 190mm x 400mm, 7.5" x 15.75" Plain Weave Carbon Fiber Thickness Tolerance is 1.4mm +/- 15% Finish: Gloss/Gloss Weight: 166.6g  ..

Dimension: 190mm x 400mm, 7.5" x 15.75" Plain Weave Carbon Fiber Thickness Tolerance is 1.5mm +/- 15% Finish: Gloss/Gloss Weight: 175.6g  ..

Dimension: 190mm x 400mm, 7.5" x 15.75" Plain Weave Carbon Fiber Thickness Tolerance is 2.0mm +/- 15% Finish: Gloss/Gloss Weight: 255g  ..

Dimension: 190mm x 400mm, 7.5" x 15.75" Plain Weave Carbon Fiber Thickness Tolerance is 2.5mm +/- 15% Finish: Gloss/Gloss Weight: 302.7g  ..

..

..