Aluminum/Carbon Fiber/Delrin Frame - BLADE MCPX

The Aluminum/Carbon Fiber/Delrin Frame is designed to improve rigidity, stability, durability and performance on the Blade mCP X helicopter. It's directly replaced the stock plastic main frame. The Aluminum/Carbon Fiber/Delrin Frame is machined from aircraft Aluminum, Carbon Fiber and Delrin to give much greater strength & rigidity which increases performance in flight and better withstands crash damage to servo circuit boards on Blade mCP X helicopter.
The Aluminum/Carbon Fiber/Delrin Frame design for use with any type of brushed motors or brushless motors in the same class (max. Motor Can diameter: 14mm) and also can be fine tuned the motor pinion gear from 7T up to 10T (full range Min. 6T to Max. 11T) for optimal performance.
More than that, the Tail Boom Mount is designed with a Pre-Tensioning System to keep the entire tail rudder system away from vibration. It can also be used with 2mm and 3mm Tail Boom diameter to get the best tail rudder system for your needs.
On top of that, the Aluminum/Carbon Fiber/Delrin Frame is built with a Secured Landing Pegs System onto frame to allow pilot to easily maintain/replace the Landing Gear after a long period of use. Also, the Carbon Canopy Mount can be replaced without any extra costs by removing the screws.
Optimize Main Frame design to save weight. It's lightest in its class. (stock plactic frame with hardwares: 3.12g, the Aluminum/Carbon Fiber/Delrin Frame: 3.6g)
The Aluminum/Carbon Fiber/Delrin Frame design will bring the best performance and the best look to your Blade mCP X helicopter.
 

	Includes
	1 x Complete Aluminum/Carbon Fiber/Delrin Frame set
	2 x High Quality Precision Main Shaft Radial Bearing MR63
	1 x Delrin 3mm Tail Boom Mount MH-MCPX005T3
	Hardwares

	Materials
	Aluminum
	Steel
	Carbon Fiber
	Carbon Rod
	Delrin

	Features
	100% CNC machined aircraft Aluminum, Carbon and Delrin main frame
	Improves rigidity, stability, durability and performance on frame system
	Withstands crash damage to servo circuit boards
	Compatible with any type of brushed motors or brushless motors in the same class (max. Motor Can diameter: 14mm)
	Fine tuned the motor pinion gear from 7T up to 10T (full range Min. 6T to Max. 11T) for optimal performance
	Pre-Tensioned Tail Boom Mount System to keep the entire tail rudder system away from vibration
	Used with 2mm and 3mm Tail Boom diameter to get the best tail rudder system
	Carbon Canopy Mount can be replaced without any extra costs
	Secured Landing Pegs System onto frame to easily maintain/replace the Landing Gear after long period of use
	Light weight and stylish Aluminum/Carbon Fiber/Delrin Frame design

	Weight
	3.6g

	Usage
	Direct replacement part for Blade mCP X helicopter

	Requires
	Read and follow the Assembly Instruction carefully
	Loctite (#242 is recommended) is required to apply to all mechanical screws for safety precaution
	Basic hand tools

	Instruction
	Manual and Instruction included

Blade mCP X is a registered trademark of Horizon Hobby, LLC