Search

The Precision CNC Hardened Steel Feathering Shaft is designed to provide a high-quality upgrade with high-stiffness; without any issue with bend or breakage. It is a direct fit replacement part for the stock Feathering Shaft. This new upgrade will be your an integral part of your BLADE 450X / 330X / 330S helicopter, which is ready ..

..

    Includes 1 x Precision CNC Hardened Steel Main Shaft     Material Hardened Steel     Weight 9.73g ..

Precision CNC Hardened Steel Main Shaft w/ Collar set was to optimize for weight, stability and durability of the BLADE 120 S / S2 helicopter. The new upgrade product is equipped with aluminum and hardened steel, to produce tight and accurate tolerances throughout the part. Included:1 x Hardened Steel Main Shaft w/ Co..

Precision CNC Hardened Steel Main Shaft w/ Collar set was to optimize for weight, stability and durability of the BLADE INFUSION 120 helicopter. The new upgrade product is equipped with aluminum and hardened steel, to produce tight and accurate tolerances throughout the part. Included:1 x Hardened Steel Main Shaft w/ ..

Precision CNC Hardened Steel Main Shaft w/ Collar set was to optimize for weight, stability and durability of the BLADE 120 S / S2 helicopter. The new upgrade product is equipped with aluminum and hardened steel, to produce tight and accurate tolerances throughout the part. Included:1 x Hardened Steel Main Shaft w/ Co..

Precision CNC Hardened Steel Main Shaft w/ Collar set was to optimize for weight, stability and durability of the BLADE INFUSION 120 helicopter. The new upgrade product is equipped with aluminum and hardened steel, to produce tight and accurate tolerances throughout the part. Included:1 x Hardened Steel Main Shaft w/ ..

Precision CNC Hardened Steel Main Shaft w/ Collar set was to optimize for weight, stability and durability of the BLADE 120 S / S2 helicopter. The new upgrade product is equipped with aluminum and hardened steel, to produce tight and accurate tolerances throughout the part. Included:1 x Hardened Steel Main Shaft w/ Co..

Precision CNC Hardened Steel Main Shaft w/ Collar set was to optimize for weight, stability and durability of the BLADE INFUSION 120 helicopter. The new upgrade product is equipped with aluminum and hardened steel, to produce tight and accurate tolerances throughout the part. Included:1 x Hardened Steel Main Shaft w/ ..

Included: 1 x Precision CNC Stainless Steel Pulley Usage: For BLADE 450X / 330X Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all mechanical screws for safety precaution Basic hand tools Instruction: Manual and Instruction included..

    Included: 1 x Precision CNC Stainless Steel Pulley Usage: For BLADE FUSION 270 / 330S Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all mechanical screws for safety precaution Basic hand tools Instruction: Manual ..

Included: 1 x Precision CNC Stainless Steel Pulley Usage: For BLADE 450X / 330X Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all mechanical screws for safety precaution Basic hand tools Instruction: Manual and Instruction included..

  Included: 1 x Precision CNC Stainless Steel Pulley Usage: For BLADE FUSION 270 / 330S Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all mechanical screws for safety precaution Basic hand tools Instruction: Manual and Instruc..

..

Included: 3 x Stainless Steel Feathering Shaft Usage: For MH-330X001TH / MH-330X101TH  ..

..

The Tri-Blade Feathering Shaft is designed with precise CNC tolerances and material strength, to optimize stability, durability and overall performance of the Blade 180 CFX helicopter. The new upgrade product is CNC machined from Stainless Steel material, to achieve the best precision and long-term durability. The Stainless Steel Tri-Blade ..

Microheli has changed standard design of the Blade Grips T-REX 150 DFC/150 X being used with complete Aluminum. We have decided to replace the standard sizes and have offered a system with more powerful Radial Bearing, Thrust Bearing and Spindle Shaft. We placed the Thrust Bearing in the inner side to increase the Spindle Shaft and Radial Bearing..

Microheli has changed standard design of the Blade Grips T-REX 150 DFC/150 X being used with complete Aluminum. We have decided to replace the standard sizes and have offered a system with more powerful Radial Bearing, Thrust Bearing and Spindle Shaft. We placed the Thrust Bearing in the inner side to increase the Spindle Shaft and Radial Bearing..

Microheli has changed standard design of the Blade Grips T-REX 150 DFC/150 X being used with complete Aluminum. We have decided to replace the standard sizes and have offered a system with more powerful Radial Bearing, Thrust Bearing and Spindle Shaft. We placed the Thrust Bearing in the inner side to increase the Spindle Shaft and Radial Bearing..

Microheli has changed standard design of the Blade Grips T-REX 150 DFC/150 X being used with complete Aluminum. We have decided to replace the standard sizes and have offered a system with more powerful Radial Bearing, Thrust Bearing and Spindle Shaft. We placed the Thrust Bearing in the inner side to increase the Spindle Shaft and Radial Bearing..

The Aluminum Tail Servo Mount w/ Steel Push Rod is optimized for weight, stability and durability of the Blade 180 CFX helicopter. The new design is used to mount onto Tail Boom, for better Tail control authority and higher center gravity on the 180 CFX helicopter; As well as for a rigid platform and firm hold of Tail Servo, from CNC Aluminum/ ..

The Aluminum Tail Servo Mount w/ Steel Push Rod is optimized for weight, stability and durability of the Blade 180 CFX helicopter. The new design is used to mount onto Tail Boom, for better Tail control authority and higher center gravity on the 180 CFX helicopter; As well as for a rigid platform and firm hold of Tail Servo, from CNC Aluminum/ ..

The Aluminum Tail Servo Mount w/ Steel Push Rod is optimized for weight, stability and durability of the Blade 180 CFX helicopter. The new design is used to mount onto Tail Boom, for better Tail control authority and higher center gravity on the 180 CFX helicopter; As well as for a rigid platform and firm hold of Tail Servo, from CNC Aluminum/ ..

The Aluminum Tail Servo Mount w/ Steel Push Rod is optimized for weight, stability and durability of the Blade 180 CFX helicopter. The new design is used to mount onto Tail Boom, for better Tail control authority and higher center gravity on the 180 CFX helicopter; As well as for a rigid platform and firm hold of Tail Servo, from CNC Alumin..

..

The CNC Hardened Steel Tail Shaft/Hub set is designed with lock pin to improve stability, durability and overall tail performance on the Blade 130 X helicopter. The CNC Hardened Steel Tail Shaft/Hub is machined from hardened steel material for precision and durability. It's built-in lock pin to ensure Tail Shaft and Tail Rotor Hub are perpendicul..

..

The CNC Hardened Steel Tail Shaft/Hub set is designed with lock pin to improve stability, durability and overall tail performance on the Blade 130 X helicopter. It's directly replaced the stock tail shaft/hub. The CNC Hardened Steel Tail Shaft/Hub is machined from hardened steel material for precision and durability. It's built-in lock pin to ens..

The CNC Hardened Steel Tail Shaft/Hub set is optimized for rigidity & durability of the Blade 180 CFX helicopter. It is compatible & directly replaced the stock. The new design is CNC machined from Hardened Steel & Stainless Steel material, with accurate tolerances throughout the part, giving you the best quality upgrade product..

The Double Bearing Stainless Steel Tail Pitch Slider (TPS) is designed with double ball bearing to improve stability, durability and overall tail performance on the Blade 130 X helicopter. It's directly replaced the stock plastic tail pitch slider. The Double Bearing Stainless Steel Tail Pitch Slider is machined from lightweight aircraft ..

The Double Bearing Stainless Steel Tail Pitch Slider (TPS) is designed with double ball bearing to improve stability, durability and overall tail performance on the Blade 130 X helicopter. It's directly replaced the stock plastic tail pitch slider. The Double Bearing Stainless Steel Tail Pitch Slider is machined from lightweight aircraft ..

The Double Bearing Stainless Steel Tail Pitch Slider (TPS) is designed with double ball bearing to improve stability, durability and overall tail performance on the Blade 130 X helicopter. It's directly replaced the stock plastic tail pitch slider. The Double Bearing Stainless Steel Tail Pitch Slider is machined from lightweight aircraft aluminum f..

The Double Bearing Stainless Steel Tail Pitch Slider (TPS) is designed with double ball bearing to improve stability, durability and overall tail performance on the Blade 130 X helicopter. It's directly replaced the stock plastic tail pitch slider. The Double Bearing Stainless Steel Tail Pitch Slider is machined from lightweight aircraft ..

..

The Hardened Steel Bevel Gear A 16T is designed for optimum rigidity, stability and durability on the Blade 180 CFX helicopter. The new upgrade product is CNC machined from Hardened Steel material, for maximum rigidity and durability. It is used to mount in the frame and the tail gear case and directly replaced the stock plastic torque tube gea..

The Hardened Steel Bevel Gear A/B are designed for optimum rigidity, stability and durability on the Blade 180 CFX helicopter. The new upgrade product are CNC machined from Hardened Steel material, for maximum rigidity and durability. More than that, with the exceptional support of the thick Aluminum Spacer which is mounted in the frame, it wil..

The Hardened Steel Bevel Gear B 16T is designed for optimum rigidity, stability and durability on the Blade 180 CFX helicopter. The new upgrade product is CNC machined from Hardened Steel material, for maximum rigidity and durability. More than that, with the exceptional support of the thick Aluminum Spacer which is mounted in the frame, it wil..

   ..

    Includes 2 x Hardened Steel Inner Shaft      Material Hardened Steel   ..

The Hardened Steel Pinion Gear E 21T with Shaft is optimized for rigidity and durability of the Blade 180 CFX helicopter. It is compatible and directly replaced the stock plastic gear and stainless steel shaft. The new upgrade product will be optimal if used with the Hardened Steel Bevel Gear A 16T (Product Code: MH-18FX008A) and  the Hard..

..

..

..

..

..

..

..