Search

The Adjustable Tail Motor Mount is specifically designed and optimized for improvements in rigidity, stability, durability and overall performance on the OMP Hobby M2 V2 / EXP / EVO helicopter.With this Tail Motor Mount you can stretch out 4mm or 8mm longer for more flying experience on your heli.Included:1 x Aluminum Tail Motor..

Included: 2 x Aluminum Canopy Mount   Usage: Use for OMP Hobby M1 / EVO    ..

..

Included: 1 x Aluminum Carbon Fiber Tail Motor Mount W/ Fin Set   Weight: 1.44g   Usage: Use for OMP Hobby M1 / EVO   Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all ..

..

..

The design of the Aluminum Main Blade Grip with Thrust Bearing was to optimize for rigidity, stability, durability and overall performance of the OMP Hobby M1 / EVO helicopter. It is directly replaced the stock main blade grip. The new upgrade product is designed with Thrust Bearing in the inner side of the Aluminum Main Blade Gri..

The CNC Aluminum Main Blade Grip w/ Thrust Bearing is specifically designed for improvements in rigidity, stability, durability and overall performance on the OMP Hobby M2 V1 / V2 / EXP / EVO helicopter.The Main Blade Grip design utilizes the best CNC machining to produce tight and accurate tolerances throughout the part from Aluminu..

Included: 1 x Aluminum Tail Motor Mount   Weight: 0.72g   Usage: Use for MH-OMM1225   Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all mechanical screws for safety pre..

..

The design of the Aluminum/Carbon Fiber Main Frame was to optimize for rigidity, stability, durability, and overall performance of the OMP Hobby M2 EVO. It is compatible and easily replaced the stock frame parts.The new upgraded product consists of incredibly strong Carbon Fiber plates, held together by the Aluminum parts and&nb..

The design of the Aluminum/Carbon Fiber Main Frame was to optimize for rigidity, stability, durability, and overall performance of the OMP HOBBY M1 / EVO helicopter. It is compatible and easily replaced the stock frame parts.The new upgraded product is the combination of Aluminum and Carbon Fiber materials will form the mos..

Included: 1 x Carbon Fiber/Delrin Anti-Rotation Guide set   Usage: Use for OMP Hobby M1 / EVO   Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all mechanical screws for safety precaution Basic ha..

..

..

..

Featuring Microheli’s best designs, the CNC Quad Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the OMP Hobby M2 EVO helicopter.Every detail of this Conversion set was scrutinized in terms of lift forces and energy consumption in-fl..

..

Use for:BLADE 180 CFXBLADE 130 SBLADE 150 S / SmartBLADE FUSION 180 / SmartBLADE INFUSION 180OMP Hobby M2 V1 / V2 / EXP / EVO..

Included:1 x CNC Aluminum Swashplate Leveler Usage:Use for BLADE INFUSION 180 / OMP Hobby M2 V1 / M2 V2 / M2 EXP / M2 EVO / GOOSKY S2..

Use for:BLADE INFUSION 120GOOSKY S1OMP Hobby M1 / EVO..

Featuring Microheli’s best designs, the CNC Triple Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the OMP Hobby M2 EVO helicopter.Every detail of this Conversion set was scrutinized in terms of lift forces and energy consumption in-..

Product DescriptionFeaturing Microheli’s best designs, the CNC Triple Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the OMP Hobby M1 / EVO helicopter.Every detail of this Conversion set was scrutinized in terms of lift forces and en..

The CNC Performance package is specifically designed with material strength and precise CNC tolerances, to optimize for stability, durability, response and overall performance of the OMP Hobby M1 / EVO helicopter.With its stylish look, outstanding features and designs, precision CNC high-performance parts and more, get ready to experience..

Featuring Microheli’s best designs, the CNC Quad Carbon Plastic Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the OMP Hobby M2 EVO helicopter.Every detail of this Conversion set was scrutinized in terms of lift forces and..

Featuring Microheli’s best designs, the CNC Triple Carbon Fiber Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the OMP Hobby M2 EVO helicopter.Every detail of this Conversion set was scrutinized in terms of lift forces and ener..

Featuring Microheli’s best designs, the CNC Triple Carbon Plastic Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the OMP Hobby M2 EVO helicopter.Every detail of this Conversion set was scrutinized in terms of lift forces and en..

Featuring Microheli’s best designs, the CNC Triple Carbon Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the OMP Hobby M1 / EVO helicopter.Every detail of this Conversion set was scrutinized in terms of lift forces and energy co..

Featuring Microheli’s best designs, the CNC Triple Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the OMP Hobby M1 / EVO helicopter.Every detail of this Conversion set was scrutinized in terms of lift forces and energy consumpti..

Featuring Microheli’s best designs, the CNC Triple Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the OMP Hobby M1 / EVO helicopter.Every detail of this Conversion set was scrutinized in terms of lift forces and energy consumpti..

Featuring Microheli’s best designs, the CNC Triple Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the OMP Hobby M1 / EVO helicopter.Every detail of this Conversion set was scrutinized in terms of lift forces and energy consumpti..

The Low Profile Carbon Fiber Landing Gear "U" Style design with lower on the front and higher on the back, to tilt your OMP Hobby M1 / EVO helicopter forward 5 degrees to avoid Tail Rotor Blades strike during landing. The new design creates a stylish overall appearance, which not only adds a cool new look to your helicopter, but..

Included: 1 x Precision CNC Aluminum Main Rotor Hub   Weight: 0.87g   Usage: Use for OMP Hobby M1 / EVO   Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all mechanical s..

Included: 1 x Precision CNC Aluminum Main Rotor Hub W/ Button   Weight: 1.01g   Usage: Use for OMP Hobby M1 / EVO   Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all me..

The Precision CNC Aluminum Prop Adapter is machined with precise CNC tolerances from Aluminum material to gain maximum precision and long-term durability. It is directly replaced screw in the middle of tail blade.Included: 1 x Aluminum Prop Adapter   Usage: Use for OMP Hobby M1 / EVO   ..

The Precision CNC Aluminum Swashplate is specifically designed for improvements in stability, durability and overall performance on the OMP Hobby M1 / EVO helicopter. It is directly replaced the stock Swashplate.The new upgrade product is machined with precise CNC tolerances from Aluminum to gain the best precision together with Stai..

The Precision CNC Aluminum Swashplate is specifically designed for improvements in stability, durability and overall performance on the OMP Hobby M2 EVO helicopter. It is directly replaced the stock Swashplate.The new upgrade product is machined with precise CNC tolerances from Aluminum to gain the best precision together with Stainl..

The Precision CNC Power Package is specifically designed with material strength and precise CNC tolerances, to optimize for stability, durability, response and overall performance of the OMP Hobby M1 / EVO helicopter.With its stylish look, outstanding features and designs, precision CNC high-performance parts and more, get ready..

Tail Motor Mount w/ Round Carbon Fiber Boom set is designed and built to improve tail stability, durability, response and overall Tail Performance on the OMP Hobby M2 EVO. It is not easily bent, broken as aluminum tail boom.It is Only for MICROHELI Frames on OMP M2 EVOIncluded:1 x Tail Motor Mount W/ Round Carbon Fiber..