Search

The 7075 Aluminum Battery Tray is specifically designed and optimized for rigidity, stability, durability and overall performance on the BLADE 180 CFX / FUSION 180 / 150 S helicopter. It is a direct-replacement of the stock plastic battery tray. The 7075 Aluminum Battery Tray design provides the ideal solution for preventing unwanted ..

The 7075 Aluminum Main Shaft Bearing Block is optimized for rigidity, stability, durability and overall performance on the BLADE 180 CFX / FUSION 180 / 150 S helicopter. The Main Shaft Bearing Block is CNC machined from Aluminum 7075 utilizing more powerful and thicker Radial Bearings than the stock.   &nbs..

..

    Includes 2 x Aluminum Landing Gear Support (GOLD) Hardwares     Material Aluminum     Weight ..

The design of the Aluminum Main Blade Grip with Thrust Bearing was to optimize for rigidity, stability, durability and overall performance of the BLADE FUSION 180 Smart helicopter. It is directly replaced the stock plastic. The new upgrade product is designed with Thrust Bearing in the inner side of the Aluminum Main Blade Grip, to increase..

..

..

..

..

The Aluminum/Carbon Fiber Landing Gear "A" Style design gives you nice assembly view which not only adds a whole great look to your BLADE 180 CFX / 150 S helicopter, but also significantly aids in visibility. Just feel the difference and make it stand out from the crowd!     Includes ..

The Aluminum/Carbon Fiber Landing Gear "D" Style design gives you nice assembly view which not only adds a whole great look to your BLADE 180 CFX / 150 S helicopter, but also significantly aids in visibility. Just feel the difference and make it stand out from the crowd!     Includes ..

The Aluminum/Carbon Fiber Landing Gear "F" Style design gives you nice assembly view which not only adds a whole great look to your BLADE 180 CFX / 150 S helicopter, but also significantly aids in visibility. Just feel the difference and make it stand out from the crowd!     Includes ..

The Aluminum/Carbon Fiber Landing Gear "I" Style design gives you nice assembly view which not only adds a whole great look to your BLADE 180 CFX / 150 S helicopter, but also significantly aids in visibility. Just feel the difference and make it stand out from the crowd!     Includes ..

The Aluminum/Carbon Fiber Landing Gear "U" Style design gives you nice assembly view which not only adds a whole great look to your BLADE 180 CFX / 150 S helicopter, but also significantly aids in visibility. Just feel the difference and make it stand out from the crowd!     Includes ..

The Aluminum/Carbon Fiber Landing Gear "Y" Style design gives you nice assembly view which not only adds a whole great look to your BLADE 180 CFX / 150 S helicopter, but also significantly aids in visibility. Just feel the difference and make it stand out from the crowd!     Includes ..

The design of the Aluminum/Carbon Fiber Main Frame was to optimize for rigidity, stability, durability, and overall performance of the BLADE FUSION 180 Smart helicopter. It is compatible and easily replaced the stock frame parts. The new upgraded product consists of incredibly strong Carbon Fiber plates, held together by the ..

..

..

Exploiting strong design by Microheli, the CNC Triple Blades Conversion set is specifically designed with material strength & precise CNC tolerances, to optimize stability, durability, response & overall performance of the BLADE FUSION 180 helicopter. Every detail of this Conversion set was scrutinized in terms of lift forces & ..

The CNC Delrin Main Gear With Adjustable Hub set is specifically designed for improvements in stability, durability and overall performance on the BLADE 180 CFX / 150 S helicopter. The Main Gear With Adjustable Hub set utilizes CNC machining to produce tight and accurate tolerances throughout the part from Aluminum..

The CNC Performance package is specifically designed with material strength and precise CNC tolerances, to optimize for stability, durability, response and overall performance of the BLADE FUSION 180 helicopter.With its stylish look, outstanding features and designs, precision CNC high-performance parts and more, get ready to experience t..

The CNC Performance package is specifically designed with material strength and precise CNC tolerances, to optimize for stability, durability, response and overall performance of the BLADE FUSION 180 Smart helicopter.With its stylish look, outstanding features and designs, precision CNC high-performance parts and more, get ready to ex..

Exploiting strong design by Microheli, the CNC Triple Yellow Plastic Blades Conversion set is specifically designed with material strength & precise CNC tolerances, to optimize stability, durability, response & overall performance of the BLADE FUSION 180 helicopter. Every detail of this Conversion set was scrutinized in terms of lif..

Exploiting strong design by Microheli, the CNC Triple Yellow Plastic Blades Conversion set is specifically designed with material strength & precise CNC tolerances, to optimize stability, durability, response & overall performance of the BLADE FUSION 180 helicopter. Every detail of this Conversion set was scrutinized in terms of lif..

Exploiting strong design by Microheli, the CNC Triple Yellow Plastic Blades Conversion set is specifically designed with material strength & precise CNC tolerances, to optimize stability, durability, response & overall performance of the BLADE FUSION 180 helicopter. Every detail of this Conversion set was scrutinized in terms of lif..

Exploiting strong design by Microheli, the CNC Triple Yellow Plastic Blades Conversion set is specifically designed with material strength & precise CNC tolerances, to optimize stability, durability, response & overall performance of the BLADE FUSION 180 helicopter. Every detail of this Conversion set was scrutinized in terms of lif..

The Double Bearing Titanium Tail Pitch Slider is specifically designed with double Radial With Flange Bearing to improve stability, durability and overall tail performance on the Blade 180 CFX helicopter. It is directly replaced the stock plastic tail pitch slider. The Double Bearing Titanium Tail Pitch Slider is CNC machined from Titanium, Alu..

The Double Bearing Weighted Tail Blade Grip set is designed with double ball bearing and weight on each tail blade grip to improve stability, durability and overall tail performance on the BLADE FUSION 180 helicopter. It's directly replaced the stock plastic tail blade grips. The Double Bearing Weighted Tail Blade Grip is machined from lightwe..

The Low Profile Carbon Fiber Landing Gear "U" Style design with lower on the front and higher on the back to tilt your BLADE 180 CFX / 150 S helicopter forward 4 degrees to avoid tail rotor blades strike during landing. The new stylish Low Profile Carbon Fiber Landing Gear "U" Style will bring your Blade 180 CFX helicopter to a higher..

The Precision CNC Aluminum Main Rotor Hub is optimized for weight, stability, durability and overall performance on the BLADE 180 CFX / 150 S helicopter.  The Main Rotor Hub is machined with precise CNC tolerances from Aluminum to gain maximum precision and long-term durability. There are two extra Microheli Damper Spacers added ..

The Precision CNC Aluminum Main Rotor Hub is optimized for weight, stability, durability and overall performance on the BLADE FUSION 180 helicopter.  The Main Rotor Hub is machined with precise CNC tolerances from Aluminum to gain maximum precision and long-term durability. Direct-replacement of the stock plastic components. Its d..

The Precision CNC Aluminum Main Rotor Hub is optimized for weight, stability, durability and overall performance on the BLADE FUSION 180 helicopter.  The Main Rotor Hub is machined with precise CNC tolerances from Aluminum to gain maximum precision and long-term durability. Direct-replacement of the stock plastic components. Its d..

The Precision CNC Aluminum Tail Gear Case is specifically designed for improvements in rigidity, stability, durability and overall performance on the BLADE FUSION 180 helicopter. The new upgrade product is machined with precise CNC tolerances from Aluminum to gain maximum precision, rigidity and long-term durability. It is directly re..

The Precision CNC Power Package is specifically designed with material strength and precise CNC tolerances, to optimize for stability, durability, response and overall performance of the BLADE FUSION 180 Smart helicopter. With its stylish look, outstanding features and designs, precision CNC high-performance parts and more, get ready to exp..

The Precision CNC Titanium X Swashplate is specifically designed to improve stability, durability and overall performance on the Blade 180 CFX helicopter. It is directly replaced the stock plastic swashplate and also allows pilots to use the Aluminum/Carbon Fiber Anti-Rotation Guide set (Product Code: MH-18FX211) for Swashplate tilti..

The 7075 Aluminum Bottom Frame is specifically designed and optimized for rigidity, stability, durability and overall performance on the BLADE 180 CFX / FUSION 180 / 150 S helicopter. It is a direct-replacement of the stock plastic bottom frame. The 7075 Aluminum Bottom Frame design provides the ideal solution for preventing unwanted ..

The Aluminum Canopy Mount set is optimized for rigidity, stability, durability and overall performance on the BLADE 180 CFX / 150 S helicopter. The Aluminum Canopy Mount set design gives you a high-quality upgrade product with the best rigidity from CNC Aluminum material which brings a rigid platform and firm hold of canopy; as well a..

The Aluminum Main Gear Hub is designed for improvements in stability, durability and overall performance on the BLADE 180 CFX / 150 S helicopter. The Main Gear Hub is CNC machined from Aluminum material. It is used for CNC Delrin Main Gear w/ Adjustable Hub set series.     ..

..

The Aluminum/Carbon Fiber Anti-Rotation Guide set is specifically designed for improvements in stability, durability and overall performance on the BLADE 180 CFX / FUSION 180 / 150 S helicopter. It is directly replaced the stock plastic components. The new upgrade product is machined with precise CNC tolerances from Aluminum, Carbon F..

Use for:BLADE 180 CFXBLADE 130 SBLADE 150 S / SmartBLADE FUSION 180 / SmartBLADE INFUSION 180OMP Hobby M2 V1 / V2 / EXP / EVO..

The CNC Blade 180 CFX Power package is specifically designed for improvements in stability, durability, response and overall performance on the BLADE 180 CFX / 150 S helicopter and ready to bring your BLADE 180 CFX / 150 S helicopter to the next level of performance and appearance. Note: You SAVE MORE THAN 10% OFF ordering t..

The CNC Delrin Main Gear With Auto-Rotation Hub set is specifically designed with Auto-Rotation Hub to improve stability, durability and overall performance on the BLADE 180 CFX / 150 S helicopter. It is optimized for weight and directly replaced the stock plastic components. The new design is utilized high-end CNC machining, to p..

The Precision CNC Solid Titanium Main Shaft/Collar set is specifically designed with Solid Titanium One-way Main Shaft and Adjustable Colar to improve stability, durability and overall performance on the BLADE 180 CFX / 150 S helicopter. The new upgrade is utilized high-end CNC machining, to produce tight and accurate tolerances throu..

The Titanium Main Shaft/CNC Delrin Main Gear/Auto-Rotation Hub set is specifically designed with Solid Titanium One-way Main Shaft, Adjustable Colar and Auto-Rotation Hub to improve stability, durability and overall performance on the BLADE 180 CFX / 150 S helicopter. The new design utilizes high-end CNC machining,..