Search

The 7075 Aluminum Battery Tray is specifically designed and optimized for rigidity, stability, durability and overall performance on the BLADE 180 CFX / FUSION 180 / 150 S helicopter. It is a direct-replacement of the stock plastic battery tray. The 7075 Aluminum Battery Tray design provides the ideal solution for preventing unwanted ..

The 7075 Aluminum Main Shaft Bearing Block is optimized for rigidity, stability, durability and overall performance on the BLADE 180 CFX / FUSION 180 / 150 S helicopter. The Main Shaft Bearing Block is CNC machined from Aluminum 7075 utilizing more powerful and thicker Radial Bearings than the stock.   &nbs..

The 7075 Aluminum/Carbon Fiber Tail Pitch Lever is specifically designed with double Radial Bearing to improve stability, durability and overall tail performance on the Blade 180 CFX helicopter. The Tail Pitch Lever is CNC machined from Aluminum 7075, Carbon Fiber and Stainless Steel material for maximum tail rigidity and long-term du..

..

    Includes 2 x Aluminum Landing Gear Support (RED) Hardwares     Material Aluminum     Weight ..

..

The design of the Aluminum Main Blade Grip with Thrust Bearing was to optimize for rigidity, stability, durability and overall performance of the BLADE 180 CFX TRIO helicopter. It is directly replaced the stock plastic. The new upgrade product is designed with Thrust Bearing in the inner side of the Aluminum Main Blade Grip, to increase Spindle..

The design of the Aluminum Main Blade Grip with Thrust Bearing was to optimize for rigidity, stability, durability and overall performance of the BLADE FUSION 180 helicopter. It is directly replaced the stock plastic. The new upgrade product is designed with Thrust Bearing in the inner side of the Aluminum Main Blade Grip, to increase Spind..

The design of the Aluminum Main Blade Grip with Thrust Bearing was to optimize for rigidity, stability, durability and overall performance of the BLADE FUSION 180 Smart helicopter. It is directly replaced the stock plastic. The new upgrade product is designed with Thrust Bearing in the inner side of the Aluminum Main Blade Grip, to increase..

The design of the Aluminum Main Drive Pulley is optimized for rigidity and durability of the Microheli Aluminum Pulley with Timing Belt Conversion set - Blade 180 CFX from CNC Aluminum material.     Includes 1 x Aluminum Main Drive Pulley (RED)   ..

..

The Aluminum Tail Boom Support Mount is optimized for rigidity, stability, durability and overall performance on the Blade 180 CFX helicopter. It is directly replaced the stock plastic components. The Tail Boom Support Mount design provides an upgrade with a significant increase in tail boom rigidity from CNC Aluminum and Delrin material, which..

The Aluminum Tail Boom Support Mount is optimized for rigidity, stability, durability and overall performance on the Blade 180 CFX helicopter. It is directly replaced the stock plastic components. The Tail Boom Support Mount design provides an upgrade with a significant increase in tail boom rigidity from CNC Aluminum and Delrin material, which..

The design of the Aluminum Tail Drive Pulley is optimized for rigidity and durability of the Microheli Aluminum Pulley with Timing Belt Conversion set - Blade 180 CFX from CNC Aluminum material.     Includes 1 x Aluminum Tail Drive Pulley (RED)   ..

The Aluminum Tail Push Rod Support is specifically designed and optimized for rigidity, stability, durability and overall performance on the Blade 180 CFX helicopter. The Tail Push Rod Support is CNC machined from Aluminum and Delrin material. It provides the ideal support for tail linkage push rod during flight and will be very compl..

..

..

..

The Aluminum/Carbon Fiber Landing Gear "A" Style design gives you nice assembly view which not only adds a whole great look to your BLADE 180 CFX / 150 S helicopter, but also significantly aids in visibility. Just feel the difference and make it stand out from the crowd!     Includes ..

The Aluminum/Carbon Fiber Landing Gear "D" Style design gives you nice assembly view which not only adds a whole great look to your BLADE 180 CFX / 150 S helicopter, but also significantly aids in visibility. Just feel the difference and make it stand out from the crowd!     Includes ..

The Aluminum/Carbon Fiber Landing Gear "F" Style design gives you nice assembly view which not only adds a whole great look to your BLADE 180 CFX / 150 S helicopter, but also significantly aids in visibility. Just feel the difference and make it stand out from the crowd!     Includes ..

The Aluminum/Carbon Fiber Landing Gear "I" Style design gives you nice assembly view which not only adds a whole great look to your BLADE 180 CFX / 150 S helicopter, but also significantly aids in visibility. Just feel the difference and make it stand out from the crowd!     Includes ..

The Aluminum/Carbon Fiber Landing Gear "U" Style design gives you nice assembly view which not only adds a whole great look to your BLADE 180 CFX / 150 S helicopter, but also significantly aids in visibility. Just feel the difference and make it stand out from the crowd!     Includes ..

The Aluminum/Carbon Fiber Landing Gear "Y" Style design gives you nice assembly view which not only adds a whole great look to your BLADE 180 CFX / 150 S helicopter, but also significantly aids in visibility. Just feel the difference and make it stand out from the crowd!     Includes ..

The design of the Aluminum/Carbon Fiber Main Frame was to optimize for rigidity, stability, durability, and overall performance of the BLADE FUSION 180 helicopter. It is compatible and easily replaced the stock frame parts. The new upgraded product consists of incredibly strong Carbon Fiber plates, held together by the A..

The design of the Aluminum/Carbon Fiber Main Frame was to optimize for rigidity, stability, durability, and overall performance of the BLADE FUSION 180 Smart helicopter. It is compatible and easily replaced the stock frame parts. The new upgraded product consists of incredibly strong Carbon Fiber plates, held together by the ..

..

The Blade 180 CFX Support Upgrade combo (RED) design gives you unique and stylish assembly view which not only add a new cool look to your Blade 180 CFX helicopter, but also significantly aid in excellent visibility. Just feel the difference and make it stand out from the crowd! Note: You SAVE MORE THAN 10% OFF ordering this combo and only ..

    Includes 1 x Carbon Fiber Vertical Fin (RED) Hardwares     Materials Carbon Fiber Decal     ..

    Includes 1 x Carbon Fiber Vertical Fin (RED) Hardwares     Materials Carbon Fiber Decal     ..

..

The design of the CNC Aluminum Tail Boom was to optimize for stability and durability of the Microheli Pulley/Timing Belt Conversion series: MH-18FX018B, MH-18FX118B, MH-18FX218B, MH-18FX318B, MH-18FX418B, MH-18FX018BX.     Includes 1 x CNC Aluminu..

The CNC Aluminum Tri-Blade Main Rotor With Button is designed with precise CNC tolerances and material strength, to optimize stability, durability, response &and overall performance of the BLADE 180 CFX / 150 S helicopter. The new design is based on high technical standards, to achieve maximum precision and long-term durability. A..

Exploiting strong design by Microheli, the CNC Aluminum/Plastic Triple Green Blade Conversion set is specifically designed with material strength and precise CNC tolerances, to optimize stability, durability, response and overall performance of the BLADE 180 CFX / 150 S helicopter. Every detail of this Conversion set was..

Exploiting strong design by Microheli, the CNC Aluminum/Plastic Triple Orange Blade Conversion set is specifically designed with material strength and precise CNC tolerances, to optimize stability, durability, response and overall performance of the BLADE 180 CFX / 150 S helicopter. Every detail of this Conversion set was scrutini..

Exploiting strong design by Microheli, the CNC Aluminum/Plastic Triple Yellow Blade Conversion set is specifically designed with material strength and precise CNC tolerances, to optimize stability, durability, response and overall performance of the BLADE 180 CFX / 150 S helicopter. Every detail of this Conversion set was scrutini..

The CNC Aluminum Tail Boom is optimized for rigidity, stability, durability and overall performance on the Blade 180 CFX helicopter. The Tail Boom is CNC machined from Aluminum material. It gives you unique and stylish assembly view, with multiple exciting and bright colors to select: Silver, red and gold, which not only adds the best..

..

Creating the strongest designs by Microheli, the CNC Aluminum/Plastic Triple Blade Conversion set (RED) is designed with material strength and precise CNC tolerances in mind, to optimize for stability, durability, response and overall performance of the BLADE 180 CFX / 150 S helicopter. Every detail is scrutinized lift force balan..

The CNC Delrin Main Gear With Adjustable Hub set is specifically designed for improvements in stability, durability and overall performance on the BLADE 180 CFX / 150 S helicopter. The Main Gear With Adjustable Hub set utilizes CNC machining to produce tight and accurate tolerances throughout the part from Aluminum..

The CNC Performance package is specifically designed with material strength and precise CNC tolerances, to optimize for stability, durability, response and overall performance of the BLADE FUSION 180 helicopter.With its stylish look, outstanding features and designs, precision CNC high-performance parts and more, get ready to experience t..

The CNC Performance package is specifically designed with material strength and precise CNC tolerances, to optimize for stability, durability, response and overall performance of the BLADE FUSION 180 Smart helicopter.With its stylish look, outstanding features and designs, precision CNC high-performance parts and more, get ready to ex..

The CNC Performance package is specifically designed with material strength and precise CNC tolerances, to optimize for stability, durability, response and overall performance of the BLADE FUSION 180 helicopter.With its stylish look, outstanding features and designs, precision CNC high-performance parts and more, get ready to experience the ne..

The CNC Performance package is specifically designed with material strength and precise CNC tolerances, to optimize for stability, durability, response and overall performance of the BLADE FUSION 180 Smart helicopter.With its stylish look, outstanding features and designs, precision CNC high-performance parts and more, get ready to ex..

The CNC Titanium Tri-Blade Swashplate is designed with precise CNC tolerances and material strength, to optimize stability, durability, response and overall performance of the Blade 180 CFXhelicopter. The new design is based on high precision and aesthetics, with special design features for the 180 CFX Tri-Bla..

Exploiting strong design by Microheli, the CNC Triple Yellow Plastic Blades Conversion set is specifically designed with material strength & precise CNC tolerances, to optimize stability, durability, response & overall performance of the BLADE FUSION 180 helicopter. Every detail of this Conversion set was scrutinized in terms of lif..

The Double Bearing Titanium Tail Pitch Slider is specifically designed with double Radial With Flange Bearing to improve stability, durability and overall tail performance on the Blade 180 CFXhelicopter. It is directly replaced the stock plastic tail pitch slider. The Double Bearing Titanium Tail Pitch Slider is CNC machined from Titanium,..

The Double Bearing Weighted Tail Blade Grip set is designed with double ball bearing and weight on each tail blade grip to improve stability, durability and overall tail performance on the BLADE FUSION 180 helicopter. It's directly replaced the stock plastic tail blade grips. The Double Bearing Weighted Tail Blade Grip is machined from lightwe..