Search

The 7075 Aluminum Battery Tray is specifically designed and optimized for rigidity, stability, durability and overall performance on the BLADE 180 CFX / FUSION 180 / 150 S helicopter. It is a direct-replacement of the stock plastic battery tray. The 7075 Aluminum Battery Tray design provides the ideal solution for preventing unwan..

The 7075 Aluminum/Carbon Fiber Tail Pitch Lever is specifically designed with double Radial Bearing to improve stability, durability and overall tail performance on the Blade 180 CFX helicopter. The Tail Pitch Lever is CNC machined from Aluminum 7075, Carbon Fiber and Stainless Steel material for maximum tail rigidity and long-term du..

The 7075 Triple Bearing Weighted Tail Blade Grip set is specifically designed with Triple Radial Bearing and weight on each Tail Blade Grip to improve stability, durability and overall Tail performance on the Blade 180 CFX helicopter. It is directly replaced the stock plastic tail blade grips. The new upgrade product is CNC machined f..

The Aluminum Tail Push Rod Support is specifically designed and optimized for rigidity, stability, durability and overall performance on the Blade 180 CFX helicopter. The Tail Push Rod Support is CNC machined from Aluminum and delrin material. It provides the ideal support for tail linkage push rod during flight and will be very complete when c..

The design of the CNC Aluminum Tail Boom was to optimize for stability and durability of the Microheli Pulley/Timing Belt Conversion series: MH-18FX018B, MH-18FX118B, MH-18FX218B, MH-18FX318B, MH-18FX418B, MH-18FX018BX.     Includes ..

    Includes 2 x CNC Aluminum 155mm Tail Boom (BLACK)     Material Aluminum     Features Optimized for rigidity, st..

    Includes 2 x CNC Aluminum 165mm Tail Boom Extension (BLACK)     Material Aluminum     Features Optimi..

    Includes 2 x CNC Aluminum 217mm Tail Boom Extension (BLACK)     Material Aluminum     Features Optimized for ri..

    Includes 2 x CNC Aluminum 270mm Tail Boom Extension (BLACK) 3 x 22AWG Wiring  3 x 2.0mm Heat Shrink Tube     Material A..

The CNC Aluminum Swashplate Leveler provides a rigid platform and firm hold of Swashplate, a high quality CNC Aluminum Swashplate Leveling Tool, for maximum precision during your BLADE 250 CFX / 230S / 230S V2 / Smart helicopter setup, rigidity and long-term durability with an unique and stylish design, easy assembly installation ever, without the ..

The CNC Aluminum Tail Boom is optimized for rigidity and durability of the Blade 200 S helicopter.The new design creates a stylish overall appearance, with multiple exciting and bright colors to select: Red, gold and black which not only adds a cool new look to your Blade 200 S helicopter, but also significantly aids in visibility.  Includes 2..

The CNC Aluminum Tail Boom is optimized for rigidity and durability of the WALKERA MASTER CP helicopter. The new design creates a stylish overall appearance, with multiple exciting and bright colors to select: Silver, Red which not only adds a cool new look to your WALKERA MASTER CP helicopter, but also significantly aids in visibility. ..

The CNC Delrin Main Gear With Adjustable Hub set is specifically designed for improvements in stability, durability and overall performance on the BLADE 180 CFX / 150 S helicopter. The Main Gear With Adjustable Hub set utilizes CNC machining to produce tight and accurate tolerances throughout the part from Aluminum..

The Double Bearing Titanium Tail Pitch Slider is specifically designed with double Radial With Flange Bearing to improve stability, durability and overall tail performance on the Blade 180 CFXhelicopter. It is directly replaced the stock plastic tail pitch slider. The Double Bearing Titanium Tail Pitch Slider is CNC machined from Titanium,..

The Precision CNC Titanium X Swashplate is specifically designed to improve stability, durability and overall performance on the Blade 180 CFX helicopter. It is directly replaced the stock plastic swashplate and also allows pilots to use the Aluminum/Carbon Fiber Anti-Rotation Guide set (Product Code: MH-18FX011) for Swashplate tilting linearly an..

The Aluminum Main Gear Hub is designed for improvements in stability, durability and overall performance on the BLADE 180 CFX / 150 S helicopter. The Main Gear Hub is CNC machined from Aluminum material. It is used for CNC Delrin Main Gear w/ Adjustable Hub set series.     Includes ..

The Aluminum Tail Boom Support Mount is specifically designed and optimized for rigidity, stability, durability and overall performance on the Blade 180 CFX helicopter. It is directly replaced the stock plastic components. The Tail Boom Support Mount design provides an upgrade with a significant increase in tail boom rigidity from CNC Alum..

The Aluminum Tail Boom/Servo Mount design is optimized for weight, stability, durability and overall performance on the Blade 180 CFX helicopter. It is directly replaced the stock plastic components. The Aluminum Tail Boom/Servo Mount is designed to bring the best tail control performance and long-term durability. It is CNC machined f..

The Aluminum Tail Boom/Servo Mount set is optimized for weight, stability, durability and overall performance on the Blade 180 CFX helicopter. It is directly replaced the stock plastic components. The Aluminum Tail Boom/Servo Mount set is specifically designed with the Aluminum Tail Servo Mount (Product Code: MH-18FX421) to allow the tail s..

The Aluminum Tail Servo Mount is used for Tail Boom/Servo Mount series: MH-18FX005M, MH-18FX105M, MH-18FX205M, MH-18FX405M.     Includes 1 x Aluminum Tail Servo Mount Hardwares     Material ..

The Aluminum Tail Servo Mount is optimized for weight, stability and durability on the Blade 180 CFXhelicopter. The new design is used to mount onto Tail Boom, for better tail control authority and higher center gravity on the 180 CFX helicopter; As well as for a rigid platform and firm hold of Tail Servo, from CNC Aluminum material, to as..

The Aluminum Tail Servo Mount w/ Steel Push Rod is optimized for weight, stability and durability of the Blade 180 CFX helicopter. The new design is used to mount onto Tail Boom, for better Tail control authority and higher center gravity on the 180 CFX helicopter; As well as for a rigid platform and firm hold of Tail Servo, from CNC Aluminum/ ..

The Aluminum/Carbon Fiber Anti-Rotation Guide set is specifically designed for improvements in stability, durability and overall performance on the BLADE 180 CFX / FUSION 180 / 150 S helicopter. It is directly replaced the stock plastic components. The new upgrade product is machined with precise CNC tolerances from Aluminum, Carbon Fiber ..

The Aluminum/Carbon Tail Boom Support set is specifically designed and optimized for durability, stability and overall performance on the Blade 180 CFX helicopter. The Tail Boom Support set is an extremely efficient and excellent support set for tail boom and frame with a significant increase in tail rigidity from precision CNC Alumin..

The CNC Aluminum Tail Boom is optimized for rigidity, stability & durability of the Blade 200 SR X helicopter.The new design is CNC machined from Aluminum material. The CNC Aluminum Tail Boom design creates a stylish overall appearance, with multiple exciting and bright colors to select: Red, gold & black, which not only adds a cool new loo..

The CNC Aluminum Tail Boom is optimized for rigidity and durability of the BLADE 230S / 230S V2 / 250 CFX helicopter.The new design creates a stylish overall appearance, with multiple exciting and bright colors to select: Silver, Red, Gold and Black which not only adds a cool new look to your BLADE 230S / 230S V2 / 250 CFX helicopter, but also sign..

The CNC Blade 180 CFX Tail Power package is specifically designed with material strength and precise CNC tolerances, to improve stability, durability, response and overall Tail performance of the Blade 180 CFX helicopter. With the stylish look, best feature and design, CNC high performance parts and more, the CNC Blade 180 CFX Tail Po..

..

..

The CNC Delrin Main Gear With Auto-Rotation Hub set is specifically designed with Auto-Rotation Hub to improve stability, durability and overall performance on the BLADE 180 CFX / 150 S helicopter. It is optimized for weight and directly replaced the stock plastic components. The new design is utilized high-end CNC machining, to produ..

The Molded Flexible Plastic Landing Gear design gives you nice assembly view which not only adds a whole new look to your BLADE 130X / 120 S / 120 S2 helicopter, but also significantly aids in visibility. See and feel the difference. Make it stand out from the crowd!     ..

The Swashplate is made of Aluminum and machined 100% Precision CNC. The Precision CNC Aluminum Swashplate is designed to improve stability, durability and overall performance on the ALIGN T-REX 150 DFC helicopter. It provides a direct upgrade for the stock plastic swashplate. The Precision CNC Aluminum Swashplate is designed using steel ball to..

The Precision CNC Aluminum Tail Gear Case is specifically designed with precise CNC tolerances and high quality selected Radial Bearings to improve stability, durability and overall Tail performance on the Blade 180 CFX helicopter. It is directly replaced the stock plastic components. The new design is equipped with high quality selected Radial..

The Precision CNC Solid Titanium Main Shaft/Collar set is specifically designed with Solid Titanium One-way Main Shaft and Adjustable Colar to improve stability, durability and overall performance on the BLADE 180 CFX / 150 S helicopter. The new upgrade is utilized high-end CNC machining, to produce tight and accurate tolerances throu..

The Titanium Main Shaft/CNC Delrin Main Gear/Auto-Rotation Hub set is specifically designed with Solid Titanium One-way Main Shaft, Adjustable Colar and Auto-Rotation Hub to improve stability, durability and overall performance on the BLADE 180 CFX / 150 S helicopter. The new design utilizes high-end CNC machining,..