Advanced X Frame (RED) - BLADE NANO CPS
Product Description
The Advanced X Frame is specifically designed to optimize for rigidity, stability, durability and overall performance of the Blade Nano CP S helicopter.
The new design is an incredibly strong and virtually indestructible frame from the perfect combination of Aluminum, Carbon Fiber and Delrin materials to form the best rigid block, to bring long-term durability and the best technical features; without any issue with bend, vibe or wag during flight. It is directly replaced the stock plastic.
The Advanced X Frame gives you the easy servo assembly installation and removal ever; provides a rigid platform and firm hold of tail boom with the frame; significantly reduces tail vibe or tail wag during flight; and can utilize extra option for brushless motor.
More than that, this new upgraded product can be set up in 2 configurations:
Configuration 1: Stock Swashplate + Stock Linear Servos |
The Servo is arranged like the stock configuration. In this regard, you can utilize the stock swashplate with anti-rotation pin on the left of the frame and white plastic anti-rotation guide. With this configuration, you will save cost without needing to buy extra Microheli swashplate. However, performance of the flight is not much better than the stock at all. The stock swashplate is tilted to the right or left easily when taking cyclic order to make the helicopter forward and backward.
Configuration 2: Microheli Swashplate + Stock Linear Servos (Cyclic servo is turned towards the inner side of the frame) |
Anti-rotation guide is installed behind the frame with anti-rotation pin which is on the same flat surface with ball linkage plate, combining with Microheli swashplate. The Microheli swashplate will go around center ball not to be tilted at all when taking cyclic order to the right or left, forward or backward. Cyclic servo is turned towards the inner side of the frame, and you must utilize three straight linkages to ensure precision and synchronism when the swashplate moves to cyclic order given. You can buy extra Servo Pushrod with Ball Links (Product Code: BLH3308).
Motor mount allows you to replace pinion and adjust distance of center pinion and main gear easily. The Advanced X Frame is technically re-engineered the third extra ball bearing between two main ball bearings of main shaft, to significantly increase in main shaft rigidity and ball bearing system durability of the frame. Mainboard is kept absolute firmly on the frame with four stock rubber dampers, to reduce unreal vibes transmitting to gyro during flight. Canopy mount design gives you the easy replacement in case of crash. Aluminum Motor Mount is only designed to dissipate and prevent the stock motor overheating (to no effect to upgrade motor).
Includes | |
1 x Advanced X Frame | |
Hardwares |
Materials | |
Aluminum | |
Carbon Fiber | |
Delrin |
Features | |
Optimizes for rigidity, stability, durability and overall performance | |
Incredibly strong and virtually indestructible frame from the perfect combination of Aluminum, Carbon Fiber and Delrin material to form the best rigid block, to bring long-term durability and the best technical features; without any issue with bend, vibe or wag during flight | |
Gives you the easy servo assembly installation and removal ever | |
Provides a rigid platform and firm hold of tail boom with the frame | |
Significantly reduces tail vibe or tail wag during flight | |
Can utilize extra option for brushless motor | |
Can be set up in 2 configurations: Stock Swashplate + Stock Linear Servos/ Microheli Swashplate + Stock Linear Servos (Cyclic servo is turned towards the inner side of the frame) | |
Motor mount allows you to replace pinion and adjust distance of center pinion and main gear easily | |
Technically re-engineered the third extra ball bearing between two main ball bearings of main shaft, to significantly increase in main shaft rigidity and ball bearing system durability of the frame | |
Mainboard is kept absolute firmly on the frame with four stock rubber dampers, to reduce unreal vibes transmitting to gyro during flight | |
Canopy mount design gives you the easy replacement in case of crash | |
Aluminum Motor Mount is only designed to dissipate and prevent the stock motor overheating (to no effect to upgrade motor) | |
Unique and stylish Advanced X Frame design |
Weight | |
4.75g |
Usage | |
For Blade Nano CP S |
Requires | |
Read and follow the Assembly Instruction carefully | |
Loctite (#242 is recommended) is required to apply to all mechanical screws for safety precaution | |
Basic hand tools |
Instruction | |
Manual and Instruction included |
Blade Nano CP S is a registered trademark of Horizon Hobby, LLC
Related Products
This product has no stock!! Please enter your information to form bellow. We will send you notification when it is back!