Advanced X Frame (BLUE) - MCPXBL

The Advanced X Frame is specifically designed for improvements in rigidity, stability, durability and overall performance on the Blade MCP X BL helicopter.

The new upgrade product is an incredibly strong and virtually indestructible frame from the perfect combination of Aluminum, Carbon Fiber and Delrin material to form the best rigid block, to bring long-term durability and the best technical features; without any issue with bend, vibe or wag during flight. It is directly replaced the stock plastic frame.

The Advanced X Frame is designed to optimize our designs. The new design gives you the easy servo assembly installation and removal ever, without the fuss and bother; provides a rigid platform and firm hold of tail boom with the frame; significantly reduces tail vibe or tail wag during flight; is able to utilize extra option for brushless motor.

More than that, the Advanced X Frame can be set up in 2 configurations:

Configuration 1: Stock Swashplate + Stock Linear Servos

The Servo is arranged like the stock configuration. In this regard, you can utilize the stock swashplate with anti-rotation pin on the left of the frame and white plastic anti-rotation guide. With this configuration, you will save cost without needing to buy extra Microheli swashplate. However, performance of the flight is not much better than the stock at all. The stock swashplate is easy to be skewed left or right when taking cyclic order to make the helicopter forward and backward.

Configuration 2: Microheli Swashplate + Stock Linear Servos

Anti-rotation guide is installed behind the frame with anti-rotation pin which is on the same flat surface with ball linkage plate, combining with Microheli swashplate. The Microheli swashplate will go around center ball not to be skewed at all when taking cyclic order left or right, forward or backward. Cyclic servo is turned towards the inner side of the frame and you must utilize three straight linkages to ensure precision and synchronism when the swashplate moves to cyclic order given. You can buy two extra linkage sets at: http://www.horizonhobby.com/  

Motor mount allows you to replace pinion and adjust distance of center pinion and main gear easily. The Advanced X Frame is technically re-engineered the third extra ball bearing between two main ball bearings of main shaft to significantly increase in main shaft rigidity and ball bearing system durability of the frame. Mainboard is kept absolute firmly on the frame with O-Rings to reduce unreal vibes transmitting to gyro during flight. Canopy mount design gives you the easy replacement in case of crash.

Note: Delrin Main Servo Mount w/Bearing MCPXBL005SB and 3mm Tail Boom Mount MCPXBL005X3 are options (not included with the Advanced X Frame).

	Includes
	1 x Carbon Fiber Rear Frame MCPXBL005RF
	1 x Aluminum Tail Boom Mount 2.5mm MCPXBL005X25
	1 x Delrin Front Landing Peg MCPXBL005FP
	1 x Carbon Fiber Motor Mount MCPXBL005MM
	1 x Aluminum Bottom Frame MCPXBL005BF
	1 x Front X Frame A/B set MCPXBL005FX
	6 x Aluminum Servo Mount (Short) MCPXBL005SX
	1 x Aluminum Main Bearing Hub MCPXBL005BX
	1 x Main Servo Mount MCPXBL005SM
	1 x Delrin Main Board Mount w/Damper MCPXBL005BD
	1 x Delrin Anti-Rotation Support MCPXBL005DAR
	1 x Carbon Fiber Mount set MCPXBL005CM
	Harwares included

	Materials
	Aluminum
	Carbon Fiber
	Delrin

	Features
	100% CNC machined from Aluminum, Carbon Fiber and Delrin
	Specifically designed for improvements in rigidity, stability, durability and overall performance on the Blade MCP X BL helicopter
	An incredibly strong and virtually indestructible Frame from the perfect combination of Aluminum, Carbon Fiber and Delrin material to form the best rigid block, to bring long-term durability and the best technical features; without any issue with bend, vibe or wag during flight
	Gives you the easy Servo assembly installation and removal ever, without the fuss and bother
	Provides a rigid platform and firm hold of Tail Boom with the Frame
	Significantly reducing tail vibe or tail wag during flight
	Able to utilize extra option for Brushless Motor
	Can be set up in 2 configurations: Stock Swashplate + Stock Linear Servos/ Microheli Swashplate + Stock Linear Servos
	Motor mount allows you to replace pinion and adjust distance of  center pinion and main gear easily
	Technically re-engineered the third extra ball bearing between two main ball bearings of main shaft to significantly increase in main shaft rigidity and ball bearing system durability of the frame
	Mainboard is kept absolute firmly on the frame with O-Rings to reduce unreal vibes transmitting to gyro during flight
	Canopy mount design gives you the easy replacement in case of crash
	Unique and stylish Advanced X Frame design

	Weight
	5.56g

	Usage
	Use for Blade MCP X BL

	Requires
	Read and follow carefully the Assembly Instruction
	Loctite (#242 is recommended) is required to apply to all mechanical screws for safety during fly
	Tools

	Instruction
	Manual and Instruction included